4 Emerson Bud Booster Sun Board w/heatsink 48 led 660nm/730nm(IR) Quantum Strip

Description

THIS LISTING INCLUDES:
4
- 30mm x 400mm 48 LED EMERSON EFFECT BUD BOOSTER SUN BOARD STRIP
4 - 40mm x 450mm Heatsinks
Thermal Tape For Strips
STRIP SPECS:
30mm x 400mm (approximately 1.2" x 16") PCB
24VDC
600mA - 900 mA per strip
48 Red (36 - 660nm Deep Red and 12 - 730nm Far Red IR) LEDs per strip
18-24 watts per board
Double mounted push-in connectors
Thermal conductivity coefficient of 1.5
2 oz. of RA copper
This is for 4 of these strips
with pre-applied thermal tape and 40mm x 450mm heatsinks
. The strips are
30mmx400mm (approximately 1.2 inch x 16 inches) 48
Diode Emerson Effect Red Booster Strips. They have 36 pcs of the 660nm Deep Red and 12 pcs of the 730nm Far Red (IR) on each strip. These are perfect to add to the 96 Diode strips in my other listings as they are the exact same size.
They are rated at 24V and 600-900mA per strip and can put out from 18-24 watts of red boosting power (if used with a constant current driver)to make your buds the best they can be. This is for 4 - 48 diode Red Booster strips with thermal tape and matching heatsinks. If you wire 2 of these in parallel, you can then wire them into a series of the lm561c or lm301b strips or blue booster strips and run them all on the same 1400mA or 1750 mA constant current driver. They do work best on a constant current driver. Check out my other listings for separate listings, different quantities, lm561c s6 strips, Blue Booster strips or, if you need a different quantity or configuration, just let me know. We always have discreet shipping and this is a private listing, so your purchase will remain anonymous on eBay.