testo 425 thermal anemometer with probe, incl. telescopic handle / Working

Description

testo 425 thermal anemometer with probe, incl. telescopic handle (max. 33 inches) / Working
testo 425 thermal anemometer with probe, incl. telescopic handle (max. 33 inches)
testo 425 thermal anemometer with probe, incl. telescopic handle (max. 33 inches), battery and calibration document
·
Flow, volume flow (cfm) and temperature measurements
·
Multi-point and timed mean calculations
·
Max-Min values make comparisons fast and easy
·
"Hold" button freezes readings
Description:
The compact testo 425 is an easy to use anemometer with attached thermal probe on a telescopic handle. Just enter the duct measurements directly into the testo 425 and volume flow measurements (cfm) are shown on the clear display. You can switch between flow and temperature readings easily. Timed and multi-point mean flow calculations allow easy flow analysis, volume accumulation estimates, and temperature variation monitoring. Min-Max values are one button simple, while the "Hold" function freezes the current readings in the display for easy data recording.
·
Flow, volume flow (cfm) and temperature measurements
·
Multi-point and timed mean calculations
·
Max-Min values make comparisons fast and easy
·
"Hold" button freezes readings
·
Clear backlit display
·
Auto Off
·
null
·
TopSafe provides water, dirt and impact protection
Technical Data:
Storage temperature
-40 to +185 °F
Operating temperature
-4 to +122 °F
Battery type
9V battery
Battery life
20 hr
Weight
10 oz
Dimensions
7 x 2.5 x 1.6 in
Material/Housing
ABS
Probe type NTC
Meas. range
-4 to +160 °F
Accuracy
±0.9 °F (+32 to +140 °F)
±1.3 °F (remaining range)
Resolution
0.1 °F
Probe type Thermo
Meas. Range
0 to +4000 fpm
Accuracy
±(6 fpm +5% of rdg.)
Resolution
2 fpm
It is in good working condition
What you see is what you get !!!
No Manual , No Cable and  no Battery inclued