TopoGrow Pro New Tech 800W LED Grow Light Full Spectrum Commercial Plant Light

Description

Foldable Linear Pro 720W
LED Grow Light
Energy Saving and High Efficiency Grow Light:
Consume Power: 720W
120W per Strip, 6 light strips.
Voltage range is 100V-277V, Lifetime is 50,000hrs.
Real Full-Spectrum Light:
Red and Warm White LED chips used,
Light PPF is 1944 umol/J, and efficacy is 2.7 umol/J.
Ideal for 6' X 6' veg and bloom phrase.
Full-term Growth:
This powerful, full-spectrum light source is intended for full-term plant growth from vegetative stage to the higher-light-requiring bloom and finishing stages.
Drives Leds to optimize fixture life and improve spectral output.
The 6 passively cooled bars provide full-spectrum, board-coverage light for full-term growth.
Noise-free LED Grow Light for Indoor Plant.
Designed for home growers, aluminum led light board used makes the light create less heat when working.
It bring you a quite grow experience
Easy to hang & Plug :
Easy to get started with seeding your favorite plants or cultivating an indoor flower garden.
pro Linear 800W LED Grow Light
Actual Power:800W
Numbers for light bars:8
Input Voltage : 100-277V Auto sensing
Mounting Height:≥6”(15cm)
Lifetime: 50000hrs
Chip: Samsung LED LM283B+Chips.
Colour rendering index:90ra
Power factor: >90%
Ambient temperature: -40-40℃
Manual Dim:350W/500W/650W/800W
Features:
High-End&High-Performance self-Heating dissipation, away from noise.
Chips: Branded Samsung LED LM283B+Chips. It can achieve a high average PPFD of 1000 umol/s m-2 on your crop.
Safety: UL Listed Branded Driver Adopted, safety isolated power supplier, long lifespan&energy saving.
Real full-spectrum(sunlight) for plants: The LED is a 1840 umol/s fixture. It can be used in a top light or multi-tiers or indoor grow tent application. This powerful,full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage.
Assembly Instructions
1.Lay the console on a flat surface with the light bar brackets facing up.
2.Attach light bars by sliding the plastic clip on back of light bars over the metal brackets attached to the console, and then match female DC connector to the corresponding male connector, fasten side by side.
3.Attach the light bar’s female connector to the corresponding male DC connector on the console. Repeat steps 1-3 for the remaining light bars. Carefully turn the console over once all of the light bars are securely fastened. You may need a helping hand for this step. Make sure the surface is clear of objects which may damage LEDs.
4.Hang the fixture in the desired location and adjust the mounting height to six inches from canopy.
LED Smart Controller
Input Voltage(V): DC 5V
Application: Seed Starting, BLOOM, VEG
Type: Remote Control
Connection Mode:Smart APP Control
Connecting: RJ14 port
Max. Load Power: 15W
Function: Auto Dimming
Features: Dimmable Switches
Default Power:315W/400W/600W/800W/1000W
Lifespan (hours):50000
Features:
1. No need for a switchboard,
2. Easy and safe installation(low voltage device),
3. Protected against short circuit,
4. Double temperature safety feature,
5. Control up to 160pcs fixtures,
6. Show output as W or %,
7. Auto shoutdown at temperature setting
Grow Lights fixture can be controlled centrally by ourSmart controller.
This replaces the often cumbersome installation with contactors and clocks,adds safety features such as automatic dimming of your lights at hightemperatures and even a safety shutdown.
Set output level from 0% to 115%.
Sunrise/Sunset Timing Setup.
Temperature and Humidity Sensors with solid cable connection.