Window Defroster Power Tab Antenna or Grid Repair Kit Epoxy Glue Adhesive 2.5 gm

Description

Back-Glass Defroster
Electrically Conductive Silver Epoxy Window Defroster Glass Repair Kit 2.5 grams
This Atom Adhesives'  Defroster and Antenna Repair Kit fixes the most common problems related to heated automotive glass. The kit includes:
two-part Conductive Tab Repair Epoxy if an existing bed of solder is not on the glass, to bond the tabs onto the glass forming an electrical and
structural connection; Grid Repair for scratched or broken defroster lines; This handy kit pays for itself.
CURE SCHEDULE:
24 hour
@
Room Temperature
TYPICAL APPLICATIONS:
Busted Auto Parts-Glass
New (1) Defroster Repair Kit
Reattach separated defroster tabs
Repair small cuts in line grid
Quick easy repairs.
NOTE:
There are many YouTube videos that will visually guide you through this process.
WINDOW PREPARATION:
Begin the repair process by using your soft cloth and window cleaner to thoroughly remove all dirt, dust, dog drool, ice cream smears and greasy
hand
prints from the rear window. Clean it inside and
out because you need
to be able to see through the glass to discern the breaches in the grid.
More
important, you need to give the conductive adhesive a clean surface to stick to.
HOW TO REPAIR THE DEFROSTER TAB:
The tabs located along the sides of the defroster connect the defroster electrically to the vehicles defrost circuit. One tab is the positive and the other ground.
If a tab comes off the defroster this will mean total instantaneous failure of the defroster.
1.
Our kit is an epoxy adhesive. To use, carefully clean and dry all surfaces to be bonded from all dirt, dust, debris and
hand-prints
from the rear window.
2.
Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong,
reliable bonds; however,
m
aintain contact
with a tape or similar for
24 Hours
until the adhesive is completely cured. P
lease,
wait 24 Hours
before using the defroster.
3.
Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container
be
thoroughly mixed prior to use.
4.
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of
52°C for 30 minutes
prior to mixing components may be
necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to
use for best results.
BENEFITS:
1 year shelf life.
Made in the USA.
Instructions included.
2 part conductive silver adhesive.
Made on demand and ships within 24 hours.
Easy 1 to 1 mix ratio for multiple applications.
Glue is specially formulated to conduct electricity.
Anyone can fix a detached rear window defogger tab.
Simply place the luer lock caps back on the syringes and re-use.
Inexpensive - saves the cost of having a shop perform the repair.
See instruction for contained easy mixing.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application